It can be seen that the main gas tank is one of the important devices to help maintain a stable system pressure. Just as the tank has the function of preventing sudden pressure drop, which adversely affects the operation of gas-using equipment and machinery. In addition, the compressed air tank also helps to separate the water in the compressed air, helping to lower the temperature of the compressed air and cool the oil. Therefore, with the above functions, it can be seen that the accumulator is a device that plays an important role and helps the compressed air supply process to be uninterrupted, stable and effective.
However, this is a device with many potential dangers when used such as: pressure explosion or electric shock. Therefore, when using, users should pay attention and ensure safety rules when using this device.
Uses of 5m3 compressed air tank
Maintain working pressure
The function of the 5m3 compressed air tank is to store the amount of compressed air that the compressor enters to a certain pressure. Then the compressed air in the tank is taken for the system to use when necessary, so that the system pressure does not drop suddenly, affecting the working process of machinery and equipment using compressed air.
Cools oil, condenses water and dirt
The5m3compressed air tank also has the role of condensing water and dirt as a device to reduce the temperature of the gas or to cool the oil.
Extend the life of the air compressor
When the pressure in the tank reaches a certain threshold, the air compressor will "load" ie at this time the air compressor does not compress the air into the container anymore, helping to reduce the current and reduce the heat of the machine. Therefore, the air compressor is rested, which increases the life and durability of the machine.
Protect the air dryer
High-temperature compressed air from the air compressor through the air compressor tank will be partially cooled down before entering the dryer. Therefore, the air dryer will perform better cooling and separating the water from the compressed air.
Partial separation of water in compressed air
Compressed air entering the air compressor tank at high temperature is reduced to low combined with the centrifugal force of the moving gas stream, causing water to condense to the bottom of the tank. Some time when the air compressor runs, open the bottom drain valve we see a certain amount of water. Therefore, the compressed air tank can partially separate the water in the compressed air.
Notes on using a 5m3 compressed air tank
- 5m3 compressed air tank is an important equipment in factories and workshops. Therefore, to improve working efficiency, it is necessary to adhere to the following necessary principles of using gas cylinders:
- Before putting the compressed air tank into use, it is recommended to inspect and ensure the prescribed standards. In addition, it is necessary to regularly check the technical and operational status to ensure safety during use.
- Avoid storing the 5m3 compressed air tank in flammable, explosive or high-temperature places.
- Do not move the compressed air tank arbitrarily. If you want to move, you need to exhaust all the gas in the tank and turn off the power.
- Users of compressed air cylinders must have health, knowledge and must be at least 18 years old.
For more information, please contact:
